Tips for Mobile Phones that fall into Water. Smartphone are always vulnerable to the danger of water or flood.
Gadget owners certainly do not want it to happen, but if the situation cannot
be avoided then surely you will feel confused and worried if they have the
phone become damaged. It would be better if you immediately take the first step
on your cell rescue.
The following first aid on the phone submerged in water or flood:
1. Lift as soon as possible
While virtually sealed, water can easily seep into the phone
in a very short time. The difference a few seconds can determine the life or
death of your gadget. Therefore, remove the phone from the water as soon as
possible, then immediately turn off to prevent short circuit. Do not turn
before being dried.
2. Drain and remove the battery installed in your
phone
For this second step is to dry the outside of the phone with
a soft textured fabric. Do not move their phone to the water in it does not
move back and forth. Strive to position the phone does not change while drying.
This step is done so that your phone will not take in water that might be to
the inside of the phone and damage the core. Note the towel in order not to get
caught in between the surface of the phone. Once dried, open the case and
remove the battery part, sim card, and memory card installed in the phone.
3. Remove SIM card and memory card
The data and information that is stored in the SIM or memory
card sometimes more important than his own cell phone. Therefore, although the
two components are relatively water resistant, you should immediately remove it
to prevent things that are not desirable, such as corrosion on the contacts
that are made of metal.
Then, immediately drain the SIM and memory card; do not put
the phone before it is completely dry.
4. Use a vacuum cleaner
To drain the water from the phone, use a vacuum cleaner when
there. Turn on and navigate to each section are wet for about 20 minutes. To
avoid pain, take turns holding it with others. This method can quickly drain
the phone so it can be turned in the shortest possible time and a half hours
when the phone is only briefly dipped into the water.
Do not direct the funnel vacuum cleaner too close to the
phone because this tool generates static electricity which is even more
dangerous for phones than water though.
Do not use a hair dryer (hair dryer) or any objects that are
blowing wind to dry the phone, even though set to “cool “. Such tools can push
more water and moisture deep into the phone so that potentially exacerbate the damage.
5. Use absorbent material to drain water mobile
Examples of the many available are rice. Enter the phone
into the rice and leave overnight or longer. More effective material is silica
gel or other moisture absorbent. Enter the phone with silica gel into the
container tightly closed.
To be effective, turn the phone's position every few hours
so that the water trapped inside to flow out through the bottom.
6. Turn on your phone
After a maximum effort and wait for at least 24 hours, now
is the time try turning on the phone.
Check first to make sure every part of the phone that the
device in question is completely dry. Then, plug the battery into the smartphone,
turn on, and see if the phone is functioning normally.
If the phone is completely dry but will not turn on, try to
connect to the charger. If the phone can be lit in this way, the possibility of
the battery is damaged and must be replaced.
7. If you still cannot turn on, bring it to location service
professionals
Do not attempt to disassemble the phone itself without the
help of professionals. You are potentially exposed to hazardous chemicals from
a cell phone or electric shock.
If the phone turns on but does not function normally, there
may have been a result of corrosion of water that remains. Remove all batteries
and accessories, then try again and wipe dry - contact metal box.
It would be better to bring it to the proper repair. Use
your phone warranty if it is still within the warranty period.
